TFL Fixed Clamps
The Die / Mold Cart System can also use pneumatic type TFL Fixed Clamps to securely clamp the mold in place. These high quality fixed type clamps allow for repeatable, high pressure clamping with less distortion on equipment resulting in longer die and mold life. Forwell’s clamps can adapt to almost all configurations of dies and molds and are available in a range of different models.
Specifications
| Model | TFL-1 | TFL-2.5 | TFL-4 | TFL-6 | |
|---|---|---|---|---|---|
| Clamping Force (ton) | hydraulic pressure 140kgf/cm2 | 1 | 2.5 | 4 | 6.3 |
| hydraulic pressure 0kgf/cm2 | 0.05 | 0.1 | 0.16 | 0.25 | |
| Full Stroke (mm) | 3.5 | 4 | 4 | 4 | |
| Clamping Stroke Y (mm) | 2 | 2 | 2 | 2 | |
| Extra Stroke Z (mm) | 1.5 | 2 | 2 | 2 | |
| Cylinder Capacity | Clamping (cm3) | 15 | 41 | 92 | 163 |
| Unclamping (cm3) | 6 | 11 | 28 | 48 | |
Dimensions
| Model | E | FA | FB | G | J | K | L | MA | MB | N |
|---|---|---|---|---|---|---|---|---|---|---|
| TFL-1 | 62 | 55 | 38 | 18 | 12 | 181.5 | 181.5 | 49.5 | 11 | 62 |
| TFL-2.5 | 86 | 78 | 58 | 27 | 14.5 | 149.2 | 208 | 58 | 28 | 80 |
| TFL-4 | 106 | 88 | 68 | 35 | 18 | 178 | 238 | 73 | 15 | 93.5 |
| TFL-6 | 125 | 108 | 84 | 45 | 25.5 | 197 | 257 | 86 | 21.5 | 99 |
| Model | P | min.Q | R | S | T | U | W | X | H(Min.) | PT |
|---|---|---|---|---|---|---|---|---|---|---|
| TFL-1 | 10 | 46 | 1.5 | 20.5 | 12 | 18 | 13 | M8 | 20 | 1/8 |
| TFL-2.5 | 11 | 55 | 2 | 32.5 | 17 | 22 | 20 | M10 | 30 | 1/8 |
| TFL-4 | 18 | 61 | 2 | 35 | 20 | 26 | 21 | M12 | 30 | 1/4 |
| TFL-6 | 17 | 75 | 3 | 44.5 | 22 | 30 | 27 | M14 | 35 | 1/4 |
